Short and Long-Wave Pass Edge Filters

更新時間：2012-04-27 17:22:26

點擊次數：1596

型  號：

規  格：

材  料：

產品描述
技術規格

●Product Description

Our short and long-wave pass filters have a steep transition between the region of transmission and reflection — much steeper than colored glass filters. Both the short and long-wave pass filters have out-of-band rejection ³OD 3 to X-ray (for LWP) and to 1200nm (for SWP). Typical transmission is ³80% for long-wave pass and ³65% for short-wave pass filters. These filters are available individually and in sets.

●Product Detail

These short and long-wave pass filters have a very steep transition between the region of transmission and reflection — much steeper than colored glass filters. They have a hard, dielectric filter coating using interference effects rather than absorption to isolate the spectral bands. Unlike colored glass filters, the center wavelength will shift to shorter wavelengths with an increase in angle of incidence. This can be useful for tilt tuning these filters to your exact wavelength. A custom bandpass filter with excellent performance can be constructed using a combination of a short-wave pass and a long-wave pass filter.

Giai long and short-wave pass filters are manufactured using methods and materials designed to deliver the highest spectral performance while providing a robust construction capable of withstanding variable climatic conditions. Transition slopes of £6% are established by a dielectric thin-film coating. This coating is optimized to provide a wide band of high average transmission. Blocking to X-ray on long wave pass filters, and to 1100 nm on short wave pass filters, is accomplished by a combination of reflection from dielectric thin-film coatings, and absorption from filter glasses.

In addition to using these filters in the traditional manner, they can be used to create custom bandpass filters with excellent performance by using a combination of a short-wave pass and a long-wave pass filter in series.

●Specifications

Minimum Active Area	20.2 mm
Surface Quality	80-50 scratch-dig; F/F per MIL-F-48616
Diameter	25.4 +0/-0.5 mm
Thickness	2.0 to 7.6 mm
Angle of Incidence	Normal
T_av Minimum Average Transmittance	Short Wave Pass: 65% Long Wave Pass: 80%
Rejection (spectral)	Short Wave Pass: 1.2l_c to 1100 nm, =0.1% T or =10^-3 Long Wave Pass: X-Ray to 0.85 l_c, =0.1% T or =10^-3
Slope*	£6% where slope%=100% (l_80%Tpk-l_5%Tabs)/l_5%Tabs
Effective Index of Refraction n_e	1.7
Wavelength Shift with Temperature	Short Wave Pass: 0.02 nm/°C Long Wave Pass: 0.025 nm/°C
Humidity	Per MIL-STD-810E, Method 507.3, Procedure III Modified to 7 cycles
Temperature Range	-50°C to + 100 °C
Cleaning	Non-abrasive method, acetone or isopropyl alcohol on lens tissue recommended

Short-Wave Pass Filters
Model	l_c Cut-On Wavelength @ 50% of T_pk (nm)	Minimum Spectral range of Transmittance l₁ to l₂(nm)
10SWF-450-B	450 ± 5	415–440
10SWF-500-B	500 ± 5	415–490
10SWF-550-B	550 ± 5	415–540
10SWF-600-B	600 ± 5	415–590
10SWF-650-B	650 ± 5	415–640
10SWF-700-B	700 ± 6	440–685
10SWF-750-B	750 ± 6	475–735
10SWF-800-B	800 ± 6	475–785
10SWF-850-B	850 ± 6	475–835
10SWF-900-B	900 ± 7	475–880
10SWF-950-B	950 ± 7	475–930
10SWF-1000-B	1000 ± 7	475–980
Long-Wave Pass Filters
Model	l_c Cut-On Wavelength @ 50% of T_pk (nm)	Minimum Spectral range of Transmittance l₁ to l₂(nm)
10LWF-400-B	400 ± 5	410–1200
10LWF-450-B	450 ± 5	460–1200
10LWF-500-B	500 ± 5	510–1200
10LWF-550-B	550 ± 5	560–1200
10LWF-600-B	600 ± 5	610–1200
10LWF-650-B	650 ± 5	660–1200
10LWF-700-B	700 ± 6	715–1200
10LWF-750-B	750 ± 6	765–1200
10LWF-800-B	800 ± 6	815–1200
10LWF-850-B	850 ± 6	865–1200
10LWF-900-B	900 ± 7	920–1200
10LWF-950-B	950 ± 7	970–1200